Common use 9mm hplc vials with inserts for aijiren autosampler

Common use hplc vial inserts for autosampler vials-aijiren

Shell Vials are an economical alternative to screw thread vials for Water’s HPLC autosamplers or any other autosampler that doesn’t use a robotic arm to move the vials. Most shells vials are sold with a polyethylene cap that has a starburst design for easy needle penetration. 1-800-267-8103 Chromatographic Specialties Inc.

Common use insert vials aijiren-HPLC Vial Inserts

Amber 9mm HPLC Vials with Insert--Lab Vials . The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on aijiren, HTA, Shimadzu, Thermo, Varian, aijiren Technology, etc. Factory Directly Supply 2ml 9mm Screw Vials Supplier. 9mm Autosampler Vials and Caps--aijiren HPLC Vials

9mm HPLC Vials for aijiren Autosampler

There are many types of 9mm hplc vials produced by aijiren, such as clear glass and amber glass. The color of amber can resist ultraviolet rays and protect light-sensitive samples. The clear glass allows customers to see the reagent level at a glance. The 9mm hplc vials made of PP are made of highly inert polypropylene, which can hold extremely

Hplc Vial Inserts - Zhejiang aijiren Technology Inc.

1)9mm screw vials can be used on all common autosampler 2)"Short screw, long neck" to make the autosampler easier to capture 3)9mm wider opening for easy punctur 4)9mm PTFE/silicone septa, has excellent chemical inertness, acid and alkali resistance 5)9mm screw blue open top pp caps 1. 9mm Short Thread Vials ND9 2. Micro-Vials & Micro-Inserts

Common use hplc inserts for autosampler vials-aijiren HPLC Vials

Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap makes it ideal for use with aijiren HPLC and GC Systems. Choosing the level of certified vial should be based on the concentration of analyte. Concentration of analytes is often tied closely with the detection source used.

Common use hplc vial caps for aijiren autosampler-aijiren

Common use hplc vial caps for aijiren autosampler Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml(actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack

2ml Short Tread HPLC Autosampler Vial for Wholesale Price

Autosampler vials. 10-425 wide screw vial; 13-425 screw sample vial; 8-425 screw vial; Micro-Insert for Autosampler Vials; ND11mm crimp vial; ND11mm snap vial; ND9mm screw vial; COD test tube; Decrimper&Crimper; Headsapce vial. Crimp top GC vial; Screw top GC vial; Purge and Trap/TOC sample vial; Rack; Reagent Bottle; Storage vial; Syringe filter

Common use 9mm hplc vials aijiren autosampler

Screw 9mm (N9) HPLC Vial, Cap, Septa and Inserts 9mm 2mL HPLC Vial without Write-on Spot . aijiren Tech 11mm Autosampler Inserts 200µL Conical . aijiren Tech™ National 11mm Autosampler Vial inserts are made of clear glass or polypropylene and available in a variety of configurations for use with HPLC or GC autosampler vials.

Common use IP250 autosampler vial inserts price aijiren

China Manufacturer 250μ L Glass Micro-Insert 9mm Screw Neck Vial IP250 Features. 1)9mm screw vials can be used on all common autosampler. Get Price 2ml Autosampler Vial-Headspace Vials Manufacturer-aijiren

Common use 9mm hplc vials aijiren series hplc-aijiren hplc

• Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary. For smaller samples, a glass insert may be used (Figure 1).

Common use 9mm vial for hplc exporter-aijiren Vials for HPLC

Common use hplc vial caps for hplc sampling-aijiren Vials With Common use hplc vial caps for hplc sampling. Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard volume) 1.5ml (actual volume) Application: HPLC and GC system Dimensions: 11.6 x 32mm Neck Diameter: 9mm Qty/Pack: 100pcs/pack Payment: T/T MOQ: 1pack.

aijiren micro insert for 9mm autosampler vial 100 pics per

Item: Micro Insert for 9mm Autosampler Vial Volume: 0.15-0.3ml Color: Transparent OEM: Available Sample: Free Certification: ISO9001:2015 Packing: 100pcs/pk Brand Name: aijiren Place of Origin: China (Mainland) Compatibility: 9mm HPLC Vials

Common use 9mm vial for hplc with inserts-aijiren Vials for HPLC

The 9 mm wide mouth screw thread vials are our most popular and recommended screw thread 2 mL CTV-1209-03 - Vial w/fused insert, 300uL, Clear, 9mm, 100. Get Price 0.1ml Micro-Insert, 31 x 5mm, clear glass, 9mm taper - Kinesis Inc. Product Categories, Vials, Inserts.

Common use 9mm vial for hplc on stock-aijiren Vials for HPLC

1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials 8-60mL EPA Storage Vials HPLC Syringe Filters

Common use autosampler vial inserts for vials-aijiren HPLC Vials

Autosampler Vial Inserts Clear glass or polypropylene inserts for 8mm, 9mm, 11mm or 13mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 125µL to 3,5mL. Send Inquiry Chat Now Sample Vials and Accessories - aijiren Technology Corporation